Gateway XT
Perfect for: Busy outdoor entrances, walkways, bridges and decking.
Gateway 14 XT (Frontrunner XT) is a heavy-duty commercial entrance mat designed to combat substantial amounts of dirt and large debris.
The deep-etched tread scrapes shoes and wheels clean, while the heel-proof open grid traps and collects debris, preventing it from coming inside. This extra slip-resistant, heavy-duty outdoor entrance mat is ideal for walkways like bridges and hardwood decking that tend to get slippery in wet and icy weather.
Seamless integration: Choose from rolls in standard widths and 10m (33') lengths or order a custom size. Can be used as an interior or exterior matting.
Simple installation: One-piece construction means you can cut to fit on site, with no previous site visits needed.
Easy to maintain: Simply roll or lift to clean, no special tools needed
Available Colors
Ancillaries
Edging, connectors and frames for surface-mounted and recessed installations. Select accessories to match your Gateway XT profile.
Gateway 14 XT — Surface-mounted
PVC edging (H: 14mm, W: 60mm)
Flexible ramp edging. 14 × 60 mm; 10.1 m rolls. Black, dark grey, dark brown, holly green, Oxford blue or yellow. Allow one tube of cold-welding paste per 10 m.
Aluminum edging (H: 15mm)
Aluminium ramp edging, supplied with screws and plugs. 15 × 45 mm; 2 m lengths. Anodised aluminium or powder-coated yellow.
Connector clips: side-to-side (H: 14mm)
Connect adjacent mat sections side-to-side. 14 mm height; packs of 10 clips.
PVC snap track (H: 14mm)
Two-piece PVC track joins rolls end-to-end or side-to-side. 14 mm high; 2.5 m lengths. Black or dark grey. Allow one tube of cold-welding paste per 10 m.
Gateway 14 XT — Recessed
H section (H: 14 mm)
Joins sections where a mat well is deeper than the mat width. 14 × 13 mm; 3 m lengths with screws and plugs. Black; specify mat insert colour.
R frame (H: 14mm)
Secures the mat’s left and right edges. 14 × 12 mm; 3 m lengths with screws and plugs. Anodised aluminium, dark grey or black.
J frame (H: 18mm)
Edge restraint for installation against a wall. 18 × 60 mm; 3 m lengths. Dark grey or black.
T frame (H: 14mm)
Divides matting into liftable sections for cleaning. 14 mm high, 27 mm wide; 3 m lengths with screws and plugs. Anodised aluminium, dark grey or black.
TL frame (H: 14mm)
Wide divider for liftable mat sections. 14 mm high, 55 mm wide; 3 m lengths with screws and plugs. Anodised aluminium.
L frame (H: 15mm)
Edge frame for circular doors and non-rectangular installations. 15 mm high; 2.7 m lengths.
U section (H: 14mm)
Secures sections in deeper mat wells. 14 × 19 mm; 3 m lengths with screws and plugs. Anodised aluminium, dark grey or black.
Gateway 10 XT — Surface-mounted
PVC edging (H: 10mm, W: 50mm)
Flexible ramp edging for low-profile matting. 10 × 50 mm; 10.1 m rolls. Black or dark grey. Allow one tube of cold-welding paste per 10 m.
Connector clips: side-to-side (H: 10mm)
Connects low-profile mat sections side-to-side. 10 mm height; packs of 10 clips.
PVC snap track (H: 10.5mm)
Two-piece track joins low-profile rolls. 10.5 mm high; 2.5 m lengths. Dark grey. Allow one tube of cold-welding paste per 10 m.
Gateway 10 XT — Recessed
R frame (H: 10mm)
Secures the mat’s left and right edges. 10 × 12 mm; 3 m lengths with screws and plugs. Anodised aluminium, dark grey or black.
U section (H: 10mm)
Secures sections in deeper mat wells. 10 × 18 mm; 3 m lengths with screws and plugs. Anodised aluminium, dark grey or black.
Z frame (H: 10mm)
Transition frame for matting beside ceramic tile. 10 × 24 mm; 3.6 m lengths with screws and plugs. Anodised aluminium.
H section (H: 10 mm)
Joins sections in deeper mat wells. 10 × 13 mm; 3.6 m lengths with screws and plugs. Black; specify mat insert colour.
FEATURES & BENEFITS
-
Interior and exterior entrances; high-traffic outdoor walkways.
-
Open grid with deep-etched, diamond-cut tread; wheel- and heel-proof.
-
Flexible PVC with a two-layer, open-grid construction. One-piece matting can be cut to fit on site.
-
Diamond-cut, deep-etched tread. Gateway 14 XT: DIN 51130 R12 slip resistance and V10 drainage.
-
Gateway 14 XT: 14 mm (9/16 in). Gateway 10 XT low profile: 10.5 mm (13/32 in).
-
10 × 0.6 m (33 ft × 2 ft); 10 × 0.91 m (33 ft × 3 ft); 5 × 1.22 m (16 ft 6 in × 4 ft). Custom sizes available.
-
Gateway 14 XT: 10.5 kg/m² (2 lb/sq ft). Gateway 10 XT: 8.7 kg/m² (1.8 lb/sq ft).
-
Manufacturer warranty: Gateway 14 XT — four years; Gateway 10 XT — two years. Subject to manufacturer warranty terms.
-
Dark Grey, Oxford Blue and Black.
Technical Info
Acoustic: Excellent sound absorption.
Chemical: Resistant to most acids, alkalines and oils. You can read more about specific chemical resistances by downloading this information sheet.
Composition: Flexible Polyvinyl Chloride (PVC).
Environment: Gateway XT is 100% recyclable. We don’t use any substances included in the SVHC list under REACH in any of our matting products.
Reversion: Thermoplastic shrinkage can result in size reductions up to 2%. This may be accelerated in hot environments. You can read more about the causes of shrinkage by downloading this information sheet.
Slip resistance: ASTM E303 Dry/Wet with lines along–lines across 77-94 / 58-71 DIN 51130: R12, V10. DIN 51130: R11, V10 (Frontrunner XT Low Profile)
Thermal: Designed to function at temperatures from -23°C and up to +60°C. Slight size variation may occur at temperature extremes.
UV light: Resistant to PVC degradation.
Volatile organic compound (VOC): CDPH/EHLB Standard Method V1.2-2017 (California Section 01350) - School Classroom: PASS
CDPH/EHLB Standard Method V1.2-2017 (California Section 01350) - Office: PASS
Measured concentration of Total Volatile Organic Compounds (TVOC): Less than/equal to 0.5 mg/m³ (in compliance with CDPH.EHLB Standard Method v1.2-2017)